Design and Implementation of an IGBT Gate Driver with Necessary Protections and SMD Devices
Subject Areas : electrical and computer engineeringM. Fazeli 1 * , S. A. Abrishamifar 2
1 -
2 - University of Science and Technology
Keywords: IGBT controlIGBT driverIGBT gate driver circuits,
Abstract :
The Gate drivers in modern power converters which use the power IGBT must be provide several main operations such as electrical isolation, current amplifying, and protection against overcurrent and overvoltage conditions. This paper describes such a new circuit which is made using SMD devices suitable for driving the high and medium power IGBTs. This driver includes an isolated switching power supply, buffer circuits, and several protection circuits. It can operate by an input signal at TTL level and %50 duty cycle and is able to work up to 6A peak current.
[1] R. Chokhawala, J. Catt, and B. Pelly, "Gate drive considerations for IGBT modules," IEEE Trans. on Industry Applications, vol. 31, no. 3, pp. 603-611, May-June 1995.
[2] C. Kuratli, Q. Huang, and A. Biber, "Implementation of high peak current IGBT gate driver in a VLSI compatible BiCMOS technology," IEEE J. of Solid State Circuits, vol. 31, no. 7, pp. 924-932, Jul. 1996.
[3] J. M. Park et al., "a monolithic IGBT gate driver for intelligent power modules in 0.8 m high voltage (50 V) CMOS process," Microelectronical Journal, vol. 32, no. 5-6, pp. 537-541, May/Jun. 2001.
[4] N. McNeil, K. Sheng, B. W. Williams, and S. J. Finney, "Assessment of off-state negative gate voltage requirements for IGBT’s," IEEE Trans. on Power Electronics, vol. 13, no. 3, pp. 436-440, May, 1998.