یک ساختار جدید دوورودی- دوخروجی مبتنی بر مبدل T-Source اصلاحشده با سه سیمپیچ کوپلشده در کاربرد انرژی خورشیدی- باتری
محورهای موضوعی : مهندسی برق و کامپیوترصابر زارع 1 , امیرحسین رجائی 2 * , محمدرضا خیراتی 3 , محمد مردانه 4
1 - -
2 - دانشگاه صنعتی شیراز
3 - دانشگاه صنعتی شیراز
4 - دانشگاه صنعتی شیراز
چکیده مقاله :
در این مقاله یک ساختار جدید از مبدلهای DC-DC دوورودی و دوخروجی با بهره ولتاژ بالا مبتنی بر مبدل منبع امپدانسی T-Source ارائه شده است. کاربرد اصلی این مبدل برای اتصال به سیستمهای انرژیهای تجدیدپذیر میباشد. در این ساختار یک منبع ورودی پانل خورشیدی و دیگری یک باتری در نظر گرفته شده است. از مزیتهای مبدل پیشنهادی میتوان به بهره ولتاژ بالا، پیوستهبودن جریان ورودی، امکان جذب توان به صورت همزمان و مستقل از باتری و پانل خورشیدی و بازدهی بالا اشاره کرد. مدهای عملکردی مبدل بررسی شده و معادلات حاکم بر آن در حالت پایدار به دست آمده است. شبیهسازی مبدل پیشنهادی انجام گردیده و یک نمونه آزمایشگاهی از مبدل ساخته شده است. مقایسه نتایج شبیهسازی و ساخت با تئوری پیشبینی شده برای کار سیستم، عملکرد مناسب مبدل پیشنهادی را تأیید میکند.
A new structure of multi-port DC-DC converter is proposed which is based on T-Source converter. It can be used for hybrid renewable energy applications. Two input ports includes a solar panel and battery. The main advantages of the converter are including; high voltage gain, continuous input current, independent mode operation of input ports, and high efficiency. Different switching modes are discussed in the relations for steady state operation of the converter are derived. A prototype of the converter is provided and several tests are performed which validates the simulations and theoretical predictions of the converter.
[1] Y. Riffoneau, S. Bacha, F. Barruel, and S. Ploix, "Optimal power flow management for grid connected PV systems with batteries," IEEE Trans. Sustain. Energy, vol. 2, no. 3, pp. 309-320, Jul. 2011.
[2] A. Sharma, et al., "Performance assessment of building integrated photovoltaic and battery energy system: a case study of TERI-retreat facilty in India," in Proc. 4th IEEE In. Conf. on Smart and Sustainable Technologies, 5 pp., Split, Croatia, 18-21 Jun. 2019.
[3] X. Li and S. Wang, "A review on energy management, operation control and application methods for grid battery energy storage systems," CSEE J. of Power and Energy Systems, vol. 1, no. 1, pp. 181-185, Jun. 2019.
[4] L. A. Fletscher, L. A. Suarez, D. Grace, C. V. Peroni, and J. M. Maestre, "Energy-aware resource management in heterogeneous cellular networks with hybrid energy sources," IEEE Trans. on Network and Service Management, vol. 16, no. 1, pp. 279-293, Aug. 2018.
[5] G. Barchi, G. Miori, D. Moser, and S. Papantoniou, "A small-scale prototype for the optimization of PV generation and battery storage through the use of a building energy management system," in Proc. IEEE Int. Conf. on Environment and Electrical Engineering and IEEE Industrial and Commercial Power Systems Europe, 5 pp., Palermo, Italy, 12-15 Jun. 2018.
[6] C. L. Shen and S. H. Yang, "Multi-input converter with MPPT feature for wind-PV power generation system," International J. of Photoenergy, vol. 24, no. 1, pp. 100-113, Apr. 2013.
[7] Y. M. Chen, Y. C. Liu, and F. Y. Wu, "Multiinput converter with power factor correction, maximum power point tracking, and ripple-free input currents," IEEE Trans. on Power Electronics, vol. 19, no. 3, pp. 631-639, May 2004.
[8] C. W. Chen, K. H. Chen, and Y. M. Chen, "A semi-isolated multi-input converter for hybrid PV/wind power charger system," in Proc. Int. Power Electronics Conf., IPEC-Hiroshima 2014-ECCE-ASIA, pp. 3592-3597, Hiroshima, Japan, 18-21 May 2014.
[9] Y. M. Chen, Y. C. Liu, S. C. Hung, and C. S. Cheng, "Multi-input inverter for grid-connected hybrid PV/wind power system," IEEE Trans. on Power Electronics, vol. 22, no. 3, pp. 1070-1077, May 2007.
[10] S. Kashif and M. Saqib, "Multiplexed control strategy for a multi-input converter using fuzzy logic algorithm," Electronics Letters, vol. 52, no. 15, pp. 1327-1329, Jul. 2016.
[11] B. Mangu and B. Fernandes, "Multi-input transformer coupled DC-DC converter for PV-wind based stand-alone single-phase power generating system," in Proc. IEEE Energy Conversion Congress and Exposition, ECCE'14, pp. 5288-5295, Pittsburgh, PA, USA, 14-18 Sept. 2014.
[12] B. Liu, S. Duan, and T. Cai, "Photovoltaic DC-building-module-based BIPV system-concept and design considerations," IEEE Trans. on Power Electronics, vol. 26, no. 5, pp. 1418-1429, Oct. 2011.
[13] V. Salas, E. Olias, A. Barrado, and A. Lazaro, "Review of the maximum power point tracking algorithms for stand-alone photovoltaic systems," Solar Energy Materials and Solar Cells, vol. 90, no. 11, pp. 1555-1578, May 2006.
[14] F. Locment, M. Sechilariu, and I. Houssamo, "Batteries and DC charge control of stand-alone photovoltaic system: experimental validation," in Proc. Power Electronics and Motion Control Conf., EPE/PEMC'10, pp. T12-43-T12-48, Ohrid, Macedonia, 6-8 Sept. 2010.
[15] P. Siwakoti, F. Peng, F. Blaabjerg, P. Chiang Loh, and G. E. Town, "Impedance source networks for electric power conversion part i: a topological review," IEEE Trans. on Power Electronics, vol. 30, no. 2, pp. 699-716, Mar. 2015.
[16] P. C. Loh and F. Blaabjerg, "Magnetically coupled impedance-source inverters," IEEE Trans. Power Electron., vol. 49, no. 5, pp. 2177-2187, May 2013.
[17] M. K. Nguyen, Y. C. Lim, and Y. G. Kim, "TZ-source inverters," IEEE Trans. on Industrial Electronics, vol. 60, no. 12, pp. 5686-5695, Nov. 2013.
[18] A. Narula and V. Verma, "PV fed cascaded modified T source converter for DC support to grid coupled inverters," in Proc.. IEEE Int. Conf. on Power Electronics, Drives and Energy Systems, PEDES'18, 6 pp., Chennai, India, 18-21 Dec. 2018.
[19] Z. Qian, O. Abdel-Rahman, H. Al-Atrash, and I. Batarseh, "Modeling and control of three-port DC/DC converter interface for satellite applications," IEEE Trans. on Power Electronics, vol. 25, no. 3, pp. 637-649, Oct. 2010.
[20] T. Bhattacharya, V. S. Giri, K. Mathew, and L. Umanand, "Multiphase bidirectional flyback converter topology for hybrid electric vehicles," IEEE Trans. on Industrial Electronics, vol. 56, no. 1, pp. 78-84, Oct. 2009.
[21] F. Caricchi, F. Crescimbini, G. Noia, and D. Pirolo, "Experimental study of a bidirectional DC-DC converter for the DC link voltage control and the regenerative braking in PM motor drives devoted to electrical vehicles," in Proc. IEEE Applied Power Electronics Conf. and Exposition, ASPEC'94, pp. 381-386, Orlando, FL, USA, 13-17 Feb. 1994.
[22] Y. M. Chen, Y. C. Liu, and F. Y. Wu, "Multi-input DC/DC converter based on the multiwinding transformer for renewable energy applications," IEEE Trans. on Industry Applications, vol. 38, no. 4, pp. 1096-1104, Aug. 2002.
[23] Y. C. Liu and Y. M. Chen, "A systematic approach to synthesizing multi-input DC-DC converters," IEEE Trans. on Power Electronics, vol. 24, no. 1, pp. 116-127, Feb. 2009.
[24] X. Sun, Y. Zhou, W. Wang, B. Wang, and Z. Zhang, "Alternative source-port-tolerant series-connected double-input DC-DC converter," IEEE Trans. on Power Electronics, vol. 30, no. 5, pp. 2733-2742, Aug. 2015.
[25] Y. Li, X. Ruan, D. Yang, F. Liu, and C. K. Tse, "Synthesis of multiple-input DC/DC converters," IEEE Trans. on Power Electronics, vol. 25, no. 9, pp. 2372-2385, Apr. 2010.
[26] Q. Wang, J. Zhang, X. Ruan, and K. Jin, "A double-input flyback DC/DC converter with single primary winding," Energy Conversion Congress and Exposition, ECCE'10, pp. 1938-1944, Atlanta, GA, USA, 12-16 Sept. 2010.
[27] Q. Wang, J. Zhang, X. Ruan, and K. Jin, "Isolated single primary winding multiple-input converters," IEEE Trans. on Power Electronics, vol. 26, no. 12, pp. 3435-3442, Sept. 2011.
[28] B. Subudhi and R. Pradhan, "A comparative study on maximum power point tracking techniques for photovoltaic power systems," IEEE Trans. on Sustainable Energy, vol. 4, no. 1, pp. 89-98, Jul. 2013. [29] M. A. Elgendy, B. Zahawi, and D. J. Atkinson, "Assessment of perturb and observe MPPT algorithm implementation techniques for PV pumping applications," IEEE Trans. on Sustainable Energy, vol. 3, no. 1, pp. 21-33, Dec. 2012.
[30] M. A. Elgendy, B. Zahawi, and D. J. Atkinson, "Operating characteristics of the P&O algorithm at high perturbation frequencies for standalone PV systems," IEEE Trans. on Energy Conversion, vol. 30, no. 1, pp. 189-198, Jul. 2015.
[31] C. Zhang, D. Zhao, J. Wang, and G. Chen, "A modified MPPT method with variable perturbation step for photovoltaic system," in Proc. Power Electronics and Motion Control Conf., pp. 2096-2099, Wuhan, China, 17-20 May 2009.