Optimal Design and Analysis of Fault Current Limiter Based on Variable Air-Core Series Reactor
Subject Areas : electrical and computer engineeringMoslem Amini Faskhoodi 1 , Aliakbar Damaki Aliabad 2 *
1 - Electrical Engineering Department, Yazd University, Yazd, Iran
2 - Electrical Engineering Department, Yazd University, Yazd, Iran
Keywords: Short circuit current, variable series reactor, initial and final inductance, optimization, performance time,
Abstract :
With the ongoing growth of the power networks and the increase of the short circuit current level in the power network, it’s necessary to use the equipment for limiting the short circuit faults. One of these equipment is fault current limiters (FCLs) based on variable reactor that they have simple structure and effective performance. This paper presents an optimal design of new fault current limiter based on variable series reactor. It is very important to obtain the optimal dimensions of the proposed FCL to achieve the best performance with considering parameters of the FCL such as performance time, initial inductance and final inductance. Hence, at the first, the proposed plan is introduced and then an analytical modeling based on equations of the reactor is used to evaluate and optimize the proposed FCL. Finally, the results of optimization are compared with results of primary design. These results confirm that the performance of optimal plan is much better than the primary plan.
[1] V. Nougain and S. Mishra, "Current-limiting reactors based time-domain fault location for high-voltage DC systems with hybrid transmission corridors," IEEE Trans. on Instrumentation and Measurement, vol. 72, Article ID: 3507010, 10 pp., 2022.
[2] A. Shah, "Impact of current limiting reactor on bulk power network-a case study," in Proc. IEEE Texas Power & Energy Conf., 6 pp. College Station, TX, USA, 13-14 Feb. 2023.
[3] J. Yuan, C. Ye, H. Zhou, J. Liu, Y. Zheng, W. Dong, Z. Ni, and L. Wei, "A compact saturated core fault current limiter magnetically integrated with decoupling windings," IEEE Trans. on Power Delivery, vol. 38, no. 4, pp. 2711-2723, Mar. 2023.
[4] Z. Zhang, J. Yuan, Y. Hong, H. Chen, C. Zou, and H. Zhou, "Hybrid multifunctional saturated-core fault current limiter," IEEE Trans. on Power Delivery, vol. 37, no. 6, pp. 4690-4699, Mar. 2022.
[5] M. Ahmadvand, S. Khanabdal, and M. Tarafdar Hagh, "A novel three phase saturable core fault current limiter structure," IEEE Trans. on Power Delivery, vol. 34, no. 2, pp. 410-419, Apr. 2019.
[6] V. Naphade, V. Ghate, and G. Dhole, "Experimental analysis of saturated core fault current limiter performance at different fault inception angles with varying DC bias," International J. Electrical Power & Energy Systems, vol. 130, Article ID: 106943, 10 pp., Sept. 2021.
[7] Y. Chen, Z. Wang, B. Shen, B. Wang, and J. Sheng, "Optimization of inductive superconducting fault current limiter for distribution networks," IEEE Trans. on Applied Superconductivity, vol. 31, no. 8, pp. 1-5, Nov. 2021.
[8] L. Wei, B. Chen, J. Yuan, C. Tian, Y. Zhong, X. Li, Y. Gao, and K. Muramatsu, "Performance and optimization study of a novel compact permanent-magnet-biased fault current limiter," IEEE Trans. on Magnetics, vol. 53, no. 11, pp. 1-4, Nov. 2017.
[9] J. Yuan, Z. Zhang, H. Zhou, P. Gan, and H. Chen, "Optimized design method of permanent magnets saturated core fault current limiters for HVDC applications," IEEE Trans. on Power Delivery, vol. 36, no. 2, pp. 721-730, Apr. 2021.
[10] B. Chen, L. Wei, C. Tian, Y. Gao, K. Muramatsu, and J. Yuan, "Optimization study of a novel small-section permanent-magnet-biased fault current limiter with leakage flux effect," in Proc. IEEE Conf. Electromagnetic Field Computation, 1 pp., Miami, FL, USA, 13-16 Nov. 2016.
[11] A. M. A. Ibrahim, I. Hamdan, S. F. Al-Gahtani, H. S. Hussein, L. S. Nasrat, and M. A. Ismeil, "Optimal shunt-resonance fault current limiter for transient stability enhancement of a grid-connected hybrid PV/wind power system," IEEE Access, vol. 9, pp. 126117-126134, 2021.
[12] R. A. H. De Oliveira, J. M. Pina, W. T. B. De Sousa, R. Nast, A. G. Pronto, and N. Vilhena, "Optimized shape of short-circuited HTS coils by cutting process for superconducting fault current limiters," IEEE Trans. on Applied Superconductivity, vol. 31, no. 9, pp. 1-9, Dec. 2021.
[13] A. Komijani, M. Kheradmandi, and M. Sedighizadeh, "Optimal allocation and control of superconducting fault current limiter and superconducting magnetic energy storage in mesh microgrid networks to improve fault ride through," J. of Operation and Automation in Power Engineering, vol. 11, no. 1, pp. 22-32, Apr. 2023.
[14] S. Chen, P. Li, R. Ball, J. De Palma, and B. Lehman, "Analysis of a switched impedance transformer-type nonsuperconducting fault current limiter," IEEE Trans. on Power Electronics, vol. 30, no. 4, pp. 1925-1936, Apr. 2015.
[15] M. Khatibi, S. Jalilzadeh, A. Hussain, and W. Haider, "A PSO-based approach for optimal allocation and sizing of resistive-type SFCLs to enhance the transient stability of power systems," Electronics, vol. 11, no. 23, Article ID: 3980, Nov. 2022.
[16] M. Song, S. Dai, C. Sheng, L. Zhong, X. Duan, P. Luo, L. Li, and T. Ma, "Time-varying resistance optimization for the resistive type superconducting fault current limiter applied in VSC-HVDC system," J. of Superconductivity & Novel Magnetism, vol. 34, no. 4, pp. 1047-1057, Jan. 2021.
[17] A. Upadhyaya, D. Roy, A. B. Choudhury, and S. Yamada, "Parametric analysis and optimization of an open-core type three-phase SISFCL," International Trans. on Electrical Energy Systems, vol. 30, no. 10, Article ID: e12534, Oct. 2020.
[18] G. dos Santos, F. Sass, V. Hugo, G. Sotelo, N. Vilhena, R. Oliveira, A. Pronto, and J. M. Pina, "Optimization design of a saturated iron core fault current limiter using a GA and PSO algorithms coupled with finite element method," IEEE Trans. on Applied Superconductivity, vol. 33, no. 2, pp. 1-11, Mar. 2023.
[19] M. Amini, A. Damaki Aliabad, and E. Amiri, "Design and analysis of fault current limiter based on air core variable series reactor," IEEE Access, vol. 9, pp. 166129-166136, 2021.
[20] E. B. Rosa and F. W. Grover, "Formulas and tables for the calculation of mutual and self-inductance," Bulletin of the Bureau of Standards, vol. 8, no. 1, 1912.
[21] S. Babic and C. Akyel, "New analytic-numerical solutions for the mutual inductance of two coaxial circular coils with rectangular cross section in air," IEEE Trans. on Magnetics, vol. 42, no. 6, pp. 1661-1669, Jun. 2006.
[22] J. C. Maxwell, A Treatise on Electricity and Magnetism, 2nd Ed., vol. 2, Oxford: Clarendon Press, pp. 309-311, 1881.
[23] S. Babic and C. Akyel, "Magnetic force calculation between thin coaxial circular coils in air," IEEE Trans. on Magnetics, vol. 44, no. 4, pp. 445-452, Apr. 2008.
[24] A. Shiri and A. Shoulaie, "A new methodology for magnetic force calculations between planar spiral coils," Prog. in Electromagnetics Research, vol. 95, pp. 39-57, Jan. 2009.