Speed Estimation and Sensorless Torque Optimization of Single Phase Induction Motor
Subject Areas : electrical and computer engineeringS. Vaez-Zadeh - Personal page 1 * , A. Payman 2
1 - University of Tehran
2 - University of Tehran
Keywords: Torque optimizationspeed estimationstationary reference framesingle phase induction motor,
Abstract :
Recently, performance improvement and speed control of Single-Phase Induction Motors (SPIMs) have been paid attention. These aims is required the machine speed. In this paper, a method is proposed to estimate the SPIMs speed, and then, its application in torque optimization of the machine is investigated. For this purpose, the motor speed is obtained in terms of the motor parameters and stator flux linkage components by use of the SPIMs equations in stationary reference frame. By obtaining the flux linkage from motor windings voltages and currents, the motor speed is estimated desirably. Then the estimated speed is used to increase the average torque, to decrease the pulsation torque and to optimize the motor torque. After that, the simulation results in condition of using the real speed is compared with the estimated speed one. The low simulation error proves the validity of the proposed method
[1] T. H. Liu, H. Ch. Wu, and M. T. Lin, "A single-phase induction motor drive with efficiency and torque improvement," in Proc. of IEEE ISIE'97, vol. 2, pp. 637-642, 1997.
[2] F. S. Neves, et al.," Single-phase induction motor drives with direct torque control," in Proc. of IEEE IECON'02, pp. 241-246, Spain, 5-8 Nov. , 2002.
[3] T. A. Lettenmaier, D. W. Novotny, and T. A. Lipo, "Single-phase induction motor with an electronically controlled capacitor," IEEE Trans. on Ind. Appl., vol. 27, no.1, pp. 38-43, Jan. /Feb. 1991.
[4] E. Muljadi, Y. Zhao, T. H. Liu, and T. A. Lipo, "Adjustable AC capacitor for a single-phase induction motor," IEEE Trans. on Ind. Appl., vol. 29, no. 3, pp. 479-485, May/Jun. 1993.
[5] T. H. Liu, "A maximum torque control with a controlled capacitor for a single-phase induction motor," IEEE Trans. on Ind. Electron., vol. 42, no. 1, pp. 17-24, Feb. 1995.
[6] J. F. M. de Almeida, L. R. Valdenebro, and E. Bim, " Fuzzy logic based maximum torque control for a single-phase induction motor," in Proc. of IEEE IECON'99, vol. 2, pp. 619-624, 1999.
[7] H. Langari and S. Vaez-Zadeh, "DSP based optimal torque control of single-phase induction motors," in Proc. of IEEE Power Electronics Specialists Conference, PESC'2001, pp. 850-855, Canada, 2001.
[8] S. J. Chapman, Electric Machinary Fundamentals, NewYork: McGraw Hill, 1985.
[9] S. Vaez-Zadeh, H. Langari, "High average-low pulsating torque operation of single-phase induction motors," in Proc. IEEE IAS'2000, pp. 1513-1518, Italy, Oct. 2000.
[10 ] ص. واعظ زاده و ح. لنگری "کنترل خازن متغیر در موتور القایی تکفاز به منظور تأمین گشتاور زیاد با ضربان کم"، نشریه دانشکده فنی دانشگاه تهران، جلد 34 ، شماره 2، صفحات 32-23، شهریور 1379.
[11] T. A. Walls and S. D. Sudhoff, "Analysis of a single-phase induction machine with a shifted auxiliary winding," IEEE Trans. on Energy Con., vol. 11, no. 4, pp. 681-686, Dec. 1996.
[12] P. C. Krause, Analysis of Electric Machinery, NewYork: McGraw Hill, 1987.