آنتن ریز نواری چاپی باند وسیع بارگذاری شده با ساختار AMC پهن‌باند برای سیستم‌های MIMO
محورهای موضوعی : مهندسی برق و کامپیوترحسین ملک پور شهرکی 1 * , علی ابوالمعصومی 2
1 - دانشگاه اراک
2 - دانشگاه اراک
کلید واژه: آنتن چاپی, رسانای مغناطیسی ساختگی (AMC), پهن‌باند, WLAN, WiMAX,
چکیده مقاله :
در این مقاله یک آنتن چاپی پهن‌باند روی سطح رسانای مغناطیسی ساختگی ارائه شده که می‌توان از آن در کاربردهای بی‌سیم مانند WLAN، WiMAX و سیستم‌های چندین ورودی و چندین خروجی (MIMO) استفاده کرد. در ساختار پیشنهادی، سطح رسانای مغناطیسی ساختگی (AMC) مسطح به عنوان صفحه زمین برای یک‌طرفه شدن الگوی این آنتن و افزایش پهنای باند امپدانسی استفاده شده است. طرح آنتن پیشنهادی از دو المان ریز نوار چاپی تغذیه‌شده به وسیله یک خط میکرواستریپی E شکل برای تزویج المان‌های چاپی تشکیل گردیده است. پهنای باند آنتن ساخته‌شده از 94/4 تا 9/6 گیگاهرتز در محدوده موج برگشتی حدود 10- دسی‌بل برای قطبش خطی در باند C را شامل می‌شود. سلول واحد AMC لوزی‌شکل، پهنای باند 24/5 تا 15/7 گیگاهرتز برای فاز بازتابی 90± درجه را نشان می‌دهد. با اضافه‌کردن سطح AMC به آنتن چاپی، یک ساختار پهن‌باند با کوچک‌سازی قابل قبول و افزایش بهره تا dBi 25/7 به دست می‌آید. نتایج شبیه‌سازی خواص امپدانسی آنتن به وسیله نرم‌افزارهای تمام موج HFSS و CST انجام گرفته است. همچنین، آرایه دوالمانه از طرح پیشنهادی برای قطبش‌های مختلف مورد بررسی قرار گرفته است. بر اساس نتایج به دست آمده، پهنای باند کاری محدوده فرکانسی 18/5 تا 81/6 گیگاهرتز را در بر می‌گیرد و جداکنندگی بین عناصر آرایه کمتر از dB 22- است. به همین منظور، آرایه آنتن‌ها می‌تواند برای سیستم‌های MIMO مورد استفاده قرار گیرد.
In this paper, a wideband printed antenna over an artificial magnetic conductor (AMC) surface is introduced which can be utilized for wireless applications such as WLAN, WiMAX, and multiple-input multiple-output (MIMO) systems. In the proposed structure, a planar AMC surface as the antenna ground plane is used to direct the radiation pattern of the antenna, and enhancing the impedance bandwidth. The proposed antenna design is composed of a pair of printed microstrip elements fed by an E-shape feed line for coupling the elements. The bandwidth of the designed antenna includes from 4.94 GHz to 6.9 GHz with a return loss of less than -10dBforlinear polarization in C-band. The rhombic-shape AMC unit cell indicates the bandwidth of 5.24-7.15 GHz for the ±90˚ reflection phase. By adding the AMC surface into the printed antenna, a wideband structure with acceptable miniaturization and gain enhancement to 7.25 dBi is achieved. The simulated results of the antenna’s impedance properties are performed by using full-wave simulators of HFSS and CST. Also, two-element array of the proposed design are investigated for different polarizations. Based on the obtained results, the operating bandwidth includes the frequency range from5.18GHz to 6.81 GHz and the isolation between the array elements is less than -22 dB. For this purpose, the antenna arrays can be applied for MIMO systems.
[1] S. Jam and H. Malekpoor, "Analysis on wideband patch arrays using unequal arms with equivalent circuit model in X-band," IEEE Antennas Wireless. Propag. Lett., vol. 15, pp. 1861-1864, 2016.
[2] A. A. Roseline, K. Malathi, and A. K. Shrivastav, "Enhanced performance of a patch antenna using spiral-shaped electromagnetic bandgap structures for high-speed wireless networks," IET Microw. Antennas Propag., vol. 5, no. 14, pp. 1750-1755, Nov. 2011.
[3] H. Malekpoor and S. Jam, "Enhanced bandwidth of shorted patch antennas using folded-patch techniques," IEEE Antennas Wirel. Propag. Lett., vol. 12, pp. 198-201, Feb. 2013.
[4] H. Malekpoor and M. Hamidkhani, "Compact multi-band stacked circular patch antenna for wideband applications with enhanced gain," Electromagnetics, vol. 39, no. 4, pp. 241-253, Mar. 2019.
[5] K. M. Mak, H. W. Lai, and K. M. Luk, "A 5G wideband patch antenna with antisymmetric L-shaped probe feeds," IEEE Trans. Antennas Propag., vol. 66, no. 2, pp. 957-961, Nov. 2018.
[6] H. Malekpoor and S. Jam, "Analysis on bandwidth enhancement of compact probe-fed patch antenna with equivalent transmission line model," IET Microw. Antennas Propag., vol. 9, no. 11, pp. 1136-1143, Aug. 2015.
[7] S. Wang, et al., "Wideband shorted patch antenna with a modified half U-slot," IEEE Antennas Wireless Propag. Lett., vol. 11, pp. 689-692, Jun. 2012.
[8] K. Klionovski and A. Shamim, "Physically connected stacked patch antenna design with 100% bandwidth," IEEE Antennas Wireless Propag. Lett., vol. 16, pp. 3208-3211, Nov. 2017.
[9] H. Malekpoor and M. Hamidkhani, "Performance enhancement of low-profile wideband multi-element MIMO arrays backed by AMC surface for vehicular wireless communications," IEEE Access, vol. 9, pp. 166206-166222, Dec. 2021.
[10] H. Malekpoor and S. Jam, "Design, analysis, and modeling of miniaturized multi-band patch arrays using mushroom-type electromagnetic band gap structures," International J. of RF and Microwave Computer-Aided Engineering, vol. 28, no. 6, pp. 1-13, Apr. 2018.
[11] L. Yang, M. Fan, F. Chen, J. She, and Z. Feng, "A novel compact electromagnetic-bandgap (EBG) structure and its applications for microwave circuits," IEEE Trans. Microw. Theory Tech., vol. 53, no. 1, pp. 183-190, Jan. 2005.
[12] R. C. Hadarig, M. E. de Cos, Y. Alvarez, and F. L. Heras, "Novel bow-tie antenna on artificial magnetic conductor for 5.8 GHz radio frequency identification tags usable with metallic objects," IET Microw. Antennas Propag., vol. 5, no. 9, pp. 1097-1102, Dec. 2011.
[13] A. Foroozesh and L. Shafai, "Effects of artificial magnetic conductors in the design of low-profile high-gain planar antennas with high-permittivity dielectric superstrate," IEEE Antennas Wireless Propag. Lett., vol. 8, pp. 10-13, Feb. 2009.
[14] P. Prakash, M. P. Abegaonkar, A. Basuand, and S. K. Koul, "Gain enhancement of a CPW-fed monopole antenna using polarization-insensitive AMC structure," IEEE Antennas Wireless Propag. Lett., vol. 12, pp. 1315-1318, Oct. 2013.
[15] H. Malekpoor and S. Jam, "Improved radiation performance of low profile printed slot antenna using wideband planar AMC surface," IEEE Trans. Antennas Propag., vol. 64, no. 11, pp. 4626-4638, Nov. 2016.
[16] D. Nashaat, H. A. Elsadek, E. A. Abdallah, M. F. Iskander, and H. M. E. Hennawy, "Ultrawide bandwidth 2×2 microstrip patch array antenna using electromagnetic band-gap structure (EBG)," IEEE Trans. Antennas Propag., vol. 59, no. 5, pp. 1528-1534, Nov. 2011.
[17] S. Jam and H. Malekpoor, "Compact 1×4 patch antenna array by means of EBG structures with enhanced bandwidth," Microw. Opt. Technol. Lett, vol. 58, no. 12, pp. 2983-2989, May 2016.
[18] S. Yan, P. J. Soh, and G. A. E. Vandenbosch, "Low-profile dual-band textile antenna with artificial magnetic conductor plane," IEEE Trans. Antennas Propag., vol. 62, no. 12, pp. 6487-6490, Dec. 2014.
[19] E. Ameri, S. H. Esmaeli, and S. H. Sedighy, "Wide band radar cross section reduction by thin AMC structure," AEU-Int. J. Electron. Commun., vol. 93, pp. 150-153, Sept. 2018.
[20] A. T. Almutawa and G. Mumcu, "Small artificial magnetic conductor backed log-periodic microstrip patch antenna," IET Microw. Antennas Propag., vol. 7, no. 14, pp. 1137-1144, Apr. 2013.
[21] B. S. Cook and A. Shamim, "Utilizing wideband AMC structures for high-gain inkjet-printed antennas on lossy paper substrate," IEEE Antennas Wireless Propag. Lett., vol. 12, pp. 76-79, Jan. 2013.
[22] N. A. Abbasi and R. J. Langley, "Multiband-integrated antenna/artificial magnetic conductor," IET Microw. Antennas Propag., vol. 5, no. 6, pp. 711-717, Apr. 2011.
[23] Y. Zheng, J. Gao, X. Cao, Z. Yuan, and H. Yang, "Wideband RCS reduction of a microstrip antenna using artificial magnetic conductor structures," IEEE Antennas Wireless Propag. Lett., vol. 14, pp. 1582-1585, Oct. 2015.
[24] M. E. de Cos, Y. Alvarez, and F. L. Heras, "Planar artificial magnetic conductor: design and characterization setup in the RFID SHF band," Journal of Electromagnetic Waves and Applications, vol. 23, pp. 1467-1478, Mar. 2009.
[25] H. Malekpoor, "Comparative investigation of reflection and band gap properties of finite periodic wideband artificial magnetic conductor surfaces for microwave circuits applications in X-band," International J. of RF and Microwave Computer-Aided Engineering, vol. 29, no. 10, Article ID: e21874, Oct. 2019.
[26] A. Foroozesh and L. Shafai, "Investigation into the application of artificial magnetic conductors to bandwidth broadening, gain enhancement and beam shaping of low profile and conventional monopole antennas," IEEE Trans. Antennas Propag., vol. 59, no. 1, pp. 4-20, Jan. 2011.
[27] W. Yang, H. Wang, W. Che, and J. Wang, "A wideband and high-gain edge-fed patch antenna and array using artificial magnetic conductor structures," IEEE Antennas Wireless Propag. Lett., vol. 12, pp. 769-772, Jun. 2013.
[28] B. S. Cook and A. Shamim, "Flexible and compact AMC based antenna for telemedicine applications," IEEE Trans. Antennas Propag., vol. 61, no. 2, pp. 524-531, Oct. 2013.
[29] D. Feng, et al., "A broadband low-profile circular-polarized antenna on an AMC reflector," IEEE Antennas Wireless Propag. Lett., vol. 16, pp. 2840-2843, Sept. 2017.
[30] S. Yan, P. J. Soh, M. Mercuri, D. Schreurs, and G. A. E. Vandenbosch, "Low profile dual-band antenna loaded with artificial magnetic conductor for indoor radar systems," IET Microw. Antennas Propag., vol. 9, no. 2, pp. 184-190, Mar. 2015.
[31] J. Liu, J. Y. Li, J. J. Yang, Y. X. Qi, and R. Xu, "AMC-loaded low-profile circularly polarized reconfigurable antenna array," IEEE Antennas Wireless Propag. Lett., vol. 19, no. 7, pp. 1276-1280, Jul. 2020.
[32] S. Rajagopal, G. Chennakesavan, D. R. P. Subburaj, R. Srinivasan, and A. Varadhan, "A dual polarized antenna on a novel broadband multilayer Artificial Magnetic Conductor backed surface for LTE/CDMA/GSM base station applications," AEU-Int. J. Electron. Commun., vol. 80, pp. 73-79, Oct. 2017.
[33] S. Ghosh, T. N. Tran, and T. L. Ngoc, "Dual-layer EBG based miniaturized multi-element antenna for MIMO systems," IEEE Trans. Antennas Propag., vol. 62, no. 8, pp. 3985-3997, Aug. 2014.
[34] G. Li, H. Zhai, L. Li, C. Liang, R. Yu, and S. Liu, "AMC-loaded wideband base station antenna for indoor access point in MIMO system," IEEE Trans. Antennas Propag., vol. 63, no. 2, pp. 525-533, Feb. 2015.
[35] J. Y. Deng, J. Y. Li, L. Zhao, and L. X. Guo, "A dual-band inverted-F MIMO antenna with enhanced isolation for WLAN applications," IEEE Antennas Wireless Propag. Lett., vol. 6, pp. 2270-2273, Jun. 2017.
[36] H. Malekpoor, A. Abolmasoumi, and M. Hamidkhani, "High gain, high isolation, and low-profile two-element MIMO array loaded by the Giuseppe Peano AMC reflector for wireless communication systems," IET Microw. Antennas Propag., vol. 16, no. 1, pp. 46-61, Jan. 2022.
[37] Z. Xu and C. Deng, "High-isolated MIMO antenna design based on pattern diversity for 5G mobile terminals," IEEE Antennas Wireless Propag. Lett., vol. 19, no. 3, pp. 467-471, Mar. 2020.
[38] J. Zhu, S. Li, S. Liao, and Q. Xue, "Wideband low-profile highly isolated MIMO antenna with artificial magnetic conductor," IEEE Antennas Wireless Propag. Lett., vol. 17, no. 3, pp. 458-462, Mar. 2018.